Running a water only cycle is a good way to get all water out from your machine and should also be done when carrying out the monthly clean as well. See the below tips for running this cycle on your machine
- Ensure that you have enough water in the water tank if you’re running a water only cycle for measuring or test purposes and make sure the machine is plugged in and switched on.
- Set the machine to the ml/oz of your choice and ensure you have a bottle/cup on the drip tray to catch the water
- Press the water droplet button on the Formula Pro Advanced screen as seen in the image above
- The machine should then dispense water only into your bottle/cup to the amount that you set it to previously
